Table of Contents
Advertisement
6.4 LED indicator lamp on the charging station
For a fully functional installation, the indicator lamp in the charging station must show a solid or flashing green light. If
another color shows, follow the troubleshooting guide below.
There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna representative.
Light
Green solid light
Green flashing light
Red flashing light
Red solid light
6.5 LED indicator lamp on the product
The LED indicator lamp on top of the product shows the current status:
Light
Green solid light
Green flashing light
Red flashing light
Yellow solid light
Yellow flashing light
Blue solid light
Blue pulsating light
Blue flashing light
White solid light
White pulsating light
White flashing light
There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna representative.
34 - Troubleshooting
Status
Good signals.
ECO mode is activated. Refer to ECO mode on page 21 .
The signals are good and
Interruption in the charging station's antenna. Speak to your local Husqvarna repre-
sentative.
Fault in the circuit board or incorrect power supply in the charging station. The fault
must be correct by an authorized service technician. Speak to your local Husqvarna
representative.
Status
The product is mowing the lawn or leaving the charging station.
The product is paused.
The product has stopped due to an error.
The STOP button has been pushed.
The product requests the PIN code.
The product is on its way to the charging station or a point of interest.
An app is connected to the product with Bluetooth
seconds.
The product is charging in the charging station.
The product is parked in charging station.
The product can at this time find the Bluetooth
The product is in appDrive mode.
The product switching off.
Firmware installation is ongoing.
The firmware must be updated.
®
, the blue solid light is lit for 3
®
to connect with.
1619 - 002 - 19.01.2021
Hide quick links:
Advertisement
Table of Contents
