Formatting A Cd-Rw - Sony CD MAVICA MVC-CD300 Operating Instructions Manual

6
Press MENU.
The menu appears.
7
Select [OK] with
z
press .
To unmark selected print
marks
Select the image to be unmarked in
v V b
step 5 with / / /
To unmark all the print
marks
b
Select [ALL] with
z
press . Select [OFF] with
z
press .
The marks on all images are
unmarked.
To cancel marking the print
mark
Select [CANCEL] with
z
then press , or select [EXIT] with
B
in step 7, then press
Notes
• You cannot mark moving images, Clip
Motion images or images recorded in
TEXT mode.
• If you mark an image recorded in TIFF
mode with a print mark, only the
uncompressed image is printed, and the
JPEG image recorded at the same time is
not printed.
• If you mark an image with a print mark,
the disc space will decrease. Also, if you
unmark the print mark, the disc space will
decrease.
• If the disc space is not sufficient, you may
not be able to mark an image with a print
mark.
82
b B
/ , then
B z
, then press .
B
in step 4, then
/
b B
/ , then
b B
/ in step 4,
b
/
z
.

Formatting a CD-RW

When deleting all the images in the
CD-RW or using the CD-RW
formatted with other equipment than
this camera, format the CD-RW. When
you format a CD-RW, all data stored
on the disc will be deleted. Check the
contents of the disc before formatting.
The initialization is also executed after
the format.
1
1
Insert only the CD-RW you
want to format.
2
Set the mode dial to SET UP.
The setup screen appears.
3
Select [ ] (DISC TOOL) with
v V
/ , [FORMAT] with
B
then press
4
Select [OK] with
z
press .
"FORMAT PLACE ON LEVEL
SURFACE" appears on the LCD
screen.
5
Select [OK] with
z
press .
To cancel formatting
Select [CANCEL] with
z
then press .
2
3 – 5
B v V
/ / ,
.
v V
/ , then
v V
/ , then
v V
in step 3,
/