illy IPERESPRESSO Y3.3 Instruction Manual page 34

EN
5 sec.
Turn on the machine by pressing the button
for 5 seconds.
After 5 seconds the button
flashing. Release the button .
At the end of the rinse cycle, the button
the button flash simultaneously.
Remove the container and empty it.
34
5
The button flashes.
Press the button to start the descaling cycle.
will start
The machine begins dispensing water.
9
and Wait until the button and the button
become steady on.
The machine is now ready for use.
6
At the end of the descaling cycle, the button
is steady on while the button is flashing.
Remove the container and empty it.
Wash the tank thoroughly and fill it with fresh
water.
Attach the tank containing fresh water (see
point 3).
10
7
Place a container of at least 0.75 litre capacity
under the dispensing spout.
Press the button to start the rinse cycle. The
machine begins dispensing water.
8