SETUP - HEADREST AND SHOULDER HARNESS
Flat
back
rest
Curved seat base
Harness Straps
not below
green zone
Above Shoulder Level
Step 7. Place buckle tongues into buckle
7
Step 8. Place baby into child seat. Ensure
8
9
Step 9. Check headrest and shoulder slot
FOR REARWARD FACING
tongue holders.
baby is positioned with their back flat
against the back rest and their bottom
correctly positioned into the curved
seat base.
position is level with shoulders but not
below.
The shoulder straps must be in the
slots which are nearest to the child's
shoulders but not lower than the
child's shoulders.
Always adjust the height of the
shoulder straps as the child grows.
Instructions for Installation & Use
43