Britax Safe-N-Sound Instruction Manual page 60

SETUP - SEATBELT FOR FORWARD FACING
6
60
Instructions for Installation & Use
Step 5. Hold the child seat in position with firm
Pull
ALWAYS REMOVE SLACK FROM
SEATBELT.
5
ENSURE THERE ARE NO TWISTS IN
SEATBELT.
Step 6. You are now ready to install top tether.
downward pressure onto the child
seating area. Remove all slack from the
seatbelt by feeding seatbelt slack from
the buckle side back across the child
seat while pulling the vehicle sashbelt
upwards. Allow excess belt to feed
back into the retractor.
Refer to page 66.