Britax Safe-N-Sound Instruction Manual page 33

SETUP - SEATBELT FOR REARWARD FACING
Pull
7
Flip buckle forward
with middle cover
DO NOT TRAP BUCKLE
Step 7. Hold the child seat in position with firm
downward pressure onto the child
seating area. Remove all slack from
the seatbelt by feeding seatbelt slack
from the buckle side back across the
child seat while pulling the vehicle
sashbelt upwards. Allow excess belt to
feed back into the retractor.
ALWAYS REMOVE SLACK FROM
SEATBELT.
ENSURE THERE ARE NO TWISTS IN
SEATBELT.
ENSURE SEATBELT IS BEHIND THE
CROTCH BUCKLE.
DO NOT TRAP BUCKLE UNDER
SEATBELT
Instructions for Installation & Use
33