Preface; Safety Precautions; Scope Of Delivery; Assembly Instructions - Aqua Computer farbwerk User And Installation Manual

FARBWERK

1. 1. 1. 1. Preface

Preface Preface Preface
The farbwerk unit is a high power LED controller for PCs.
Considering the fast technical development, we reserve the right to perform alter-
ations to the products at any time. It therefore is possible that your product does
not correspond precisely to the descriptions or illustrations in this manual.

2. 2. 2. 2. Safety precautions

Safety precautions Safety precautions Safety precautions
The following safety precautions have to be observed at all times:
Save your data onto suitable media before working on your hardware!
●
The farbwerk unit may only be used inside a PC case!
●
Never touch electronic components during operation! Do not connect or
●
disconnect cables to/from the device while the device is powered! Compo-
nents may get very hot during operation. After power off, let the device cool
down for at least 30 minutes before touching it!
Do not turn the PC on unless you are sure that all cable connections to/from
●
the farbwerk unit are correctly attached!
This product is not designed for use in life support appliances, devices, or
●
systems where malfunction of this product can reasonably be expected to re-
sult in personal injury. Aqua Computer GmbH & Co. KG customers using or
selling this product for use in such application do so at their own risk and
agree to fully indemnify Aqua Computer GmbH & Co. KG for any damages
resulting from such application!

3. 3. 3. 3. Scope of delivery

Scope of delivery Scope of delivery Scope of delivery
One farbwerk controller
●
One internal USB cable (replacement part no. 53085)
●
Mounting material
●
This manual
●

4. 4. 4. 4. Assembly instructions

Assembly instructions
Assembly instructions Assembly instructions
The farbwerk controller can be installed inside the PC case using the supplied
screws and nuts. In order to access the mounting holes, bend the rubber insulation
away from the top cover of the farbwerk controller and remove the top cover. Re-
install the top cover afterwards.
Alternatively, double sided adhesive tape can be used to secure the farbwerk con-
troller inside the PC case.
Make sure that the electric connectors do not have contact to metal parts or other
electronic devices inside the PC case, otherwise malfunctions or destruction of the
farbwerk unit or other devices may occur!
- 4 - Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
aqua computer
© 2014-2020