Preface; Safety Precautions; Scope Of Delivery; Assembly Instructions - Aqua Computer QUADRO User And Installation Manual

QUADRO

1. 1. 1. 1. Preface

Preface Preface Preface
The QUADRO is a four channel PWM fan controller with outstanding functionality,
equally suited for water cooled or air cooled computers.
In addition to the four PWM fan outputs with speed signal monitoring, the
QUADRO is equipped with four temperature sensor inputs, one flow sensor input
as well as USB and aquabus interfaces. As a special feature, an integrated RGBpx
effect controller for up to 64 individually addressable LEDs is included.
Considering the fast technical development, we reserve the right to perform alter-
ations to the products at any time. It therefore is possible that your product does
not correspond precisely to the descriptions or especially the illustrations in this
manual.

2. 2. 2. 2. Safety precautions

Safety precautions Safety precautions Safety precautions
The following safety precautions have to be observed at all times:
Read this manual thoroughly and entirely!
●
Save your data onto suitable media before working on your hardware!
●
This product is not designed for use in life support appliances, devices, or
●
systems where malfunction of this product can reasonably be expected to re-
sult in personal injury. Aqua Computer GmbH & Co. KG customers using or
selling this product for use in such application do so at their own risk and
agree to fully indemnify Aqua Computer GmbH & Co. KG for any damages
resulting from such application!

3. 3. 3. 3. Scope of delivery

Scope of delivery Scope of delivery Scope of delivery
One QUADRO controller
●
One temperature sensor (replacement part no. 53026)
●
One internal USB cable (replacement part no. 53215)
●
Four screws M3 x 8 mm (replacement part no. 91032 or 91069)
●
Four hex nuts M3 (replacement part no. 91017)
●
This manual
●

4. 4. 4. 4. Assembly instructions

Assembly instructions
Assembly instructions Assembly instructions
The QUADRO controller can be installed inside the PC case using the supplied
screws and nuts. In order to access the mounting holes, bend the rubber insulation
away from the top cover of the QUADRO controller and remove the top cover.
Reinstall the top cover afterwards.
Alternatively, double sided adhesive tape can be used to secure the QUADRO
controller inside the PC case.
- 4 - Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
aqua computer
© 2018-2020