Assembly instructions Assembly instructions Use the supplied screws to install the farbwerk controller inside your PC case. Make sure that the PCB and electronic components do not have contact to metal parts or other electronic devices inside the PC case, otherwise malfunctions or de-...
Connector for communication with other Aqua Computer devices. Use a compati- ble aquabus cable (not included in delivery, article no. 53122/53162) to connect the farbwerk controller board to a suitable connector of a compatible device, for example an aquaero. USB and aquabus interface can be used at the same time.
6.1. Installation of the aquasuite software 6.1. Installation of the aquasuite software For configuration and monitoring of farbwerk units, the aquasuite software is available for download from our website www.aqua-computer.de. You will find the most up-to-date version in the support section of the website.
8. Data log (aquasuite) 8. Data log (aquasuite) 8. Data log (aquasuite) Data from all connected Aqua Computer devices can be logged by the aquasuite. Logged data can then be analyzed by creating charts or be exported to files. 8.1. Log settings 8.1.
“Aqua Computer Service” to be installed and active. 3. A third party software directly transmits data to the farbwerk via USB connec- tion. This requires the third party software to be installed, configured and running.
In the AIDA64 preferences menu, writing to WMI must be activated in the „external applications“ sub-menu: After activating “Use sensor with Aqua Computer Service” in the aquasuite, click the “Select data source” button to assign the currently selected software sensor to a temperature sensor provided by third party software.
Before connecting farbwerk devices to an aquaero 5/6 controller, each farbwerk device has to be configured to an individual aquabus address. You may skip this step if only one farbwerk device is connected. Addresses 20 and 21 are available for farbwerk devices.
FARBWERK All farbwerk outputs to be controlled by the aquaero must be configured to use an “External controller source (aquabus, Bluetooth, USB)” within the farbwerk con- troller configuration. This requires a (temporary) USB connection between PC and farbwerk controller.
See chapter 11.1. for reference. Tap the farbwerk device you want to pair to your mobile phone and enter the pair- ing key for the farbwerk device. Factory default key is “1234”, see chapter 11.4.
24/7. To get in direct contact with our customer support team, we offer several options: email: support@aqua-computer.de Address: Aqua Computer GmbH & Co. KG Gelliehäuser Str. 1 37130 Gleichen, Germany Tel: +49 (0) 5508 9749290 (9-16 h Central European Time)
Need help?
Do you have a question about the farbwerk and is the answer not in the manual?
Questions and answers