Advertisement
Service
Allow the power tool to be repaired only by qualified persons and only with the original replacement
parts. In order ensure that the safety of the machine is maintained.
Warnings
While working with this tool, the dust caused can be dangerous to someone's health:
While working with a sander always wear eye protection and a dust mask.
Do not work with material containing asbestos. Asbestos is known to cause cancer.
Special caution is to be taken while sanding material containing lead:
All persons, that are working with the machine or entering the workspace, must wear a
◦
special mask for protection from lead colours and steam.
Children and pregnant women are not allowed to enter the workspace.
◦
At the workspace, it is not allowed to eat, drink, or smoke. Contact with or inhaling of the
◦
sanded dust (e. g. lead-based coating material) can cause damage to user's or other per-
sons' health.
Always wear a properly sized personal protection equipment such as a dust mask and use
◦
a dust bag while sanding.
The power cable must be kept away from the moving parts of the machine.
Wear protection goggles, especially while sanding above your head.
Abrasive disc selection
The drywall sander is shipped with 6 pieces of sanding paper (80/100/120/150/180/240 grit) in form of
abrasive discs. This abrasive is suitable for most applications. Abrasive discs of 120 grit and 240 grit
are available for situations requiring a smoother finish.
Installation
Before performing a repair, replacing parts or other electric tool accessories, be sure to pull out the
plug from the socket
Sand paper selection
According to the material and the grinding effect, select the appropriate sandpaper.
Material
Pigment
Paint
Filling agent
Interstitial material
Replacement of sanding paper
Before installing the new sanding pa-
per, must first clear dirt sticking grind-
ing wheel, such as the use of brush.
Grinding surface adhesive disc has a
layer of cloth, it can quickly and easily
installed flocking self-adhesive sandpa-
per. The surface grinding sandpaper
pressed in the adhesive disc.
Do not use the sander without a proper
abrasive pad installed (to prevent
severe damage to the work).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Use
Removal of the pigment
Removal of the pain
Grinding bottom pigment (such as finish-
ing bottom)
Brush paint, grinding residues
Pigment layer drips and convex
Flat bottom material for painting
Item 61055
Grit
40
60
80
100
120
180
Page 8
12
2020-1
Advertisement
