Main Menu; The Tracer 64X0 - ADTRAN 6000 Series System Manual

TRACER 6000 Series Integrated System Manual
I. Rx Power
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols
( ) and the actual real-time value (in dBm). The more symbols (
#
the link is down in either direction and remote end data is unavailable,
displayed in place of the symbols (
J. Tx Power
Displays both an approximate transmitter levels (for both the local and remote units) using a series of
symbols ( ) and the actual real-time value (in dBm). The more symbols (
#
signal. If the link is down in either direction and remote end data is unavailable,
is displayed in place of the symbols (
K. Navigation Reminders
Displays system navigation reminders. For more details on system navigation, refer to Navigating the
Terminal Menu on page 55.
L. Real-Time Signal Values
Displays real-time signal values for Rx Quality, Rx Power, and Tx Power (for both the local and
remote units).
Real-time signal values are not supported on all TRACER 64x0 systems. Systems must be
ADTRAN calibrated to provide readings for Rx or Tx Power signal levels.
> M M
AIN ENU
The TRACER 64x0 Main menu page provides access to all other configuration/status pages. Figure 3 on
page 60 shows the TRACER 64x0 Main menu page.
Installed network modules are displayed as menu options 5 (slot 1) and 6 (slot 2). Menu
options for empty slots are not displayed.
612806420L1-1F
).
#
).
#
Copyright © 2005 ADTRAN, Inc.
Section 5 User Interface Guide
) displayed, the stronger the signal. If
#
D N A
ATA OT VAILABLE
) displayed, the stronger the
#
D N
ATA
is
A
OT VAILABLE
59