ADTRAN 6000 Series System Manual page 68

Section 5 User Interface Guide
7
Days
Figure 11. RF Link Min/Max Received Signal Quality History
The received power quality level (
received signal quality levels in 24-hour or 15-minute increments, and is displayed as a numerical value
from 0 to 100, with 0 corresponding to poor signal quality and 100 corresponding to exceptional signal
quality.
Radio links with consistently high
interference. Radio links with a large difference between
experiencing fading, reflections, or intermittent interference or installation problems such
as loose connectors, damaged coax cable, water contaminated feedlines, or damaged
lightning arrestors. Radio links with consistently low
experiencing interference, low receive levels, or installation problems. If this is the case,
examine the
with low received signal quality numbers indicate interference, while low received power
numbers with low received signal quality numbers indicate low receive levels or
installation problems.
Press <u> to view the next 24-hour segment (for the 7 day totals) and <d> to view the
previous 24-hour segment.
Press <f> to view the next 8-hour segment of 15-minute totals and <b> to view the
previous 8-hour segment.
68
and ) represents the minimum and maximum values of
MIN MAX
MIN
RF MIN/MAX R
LINK ECEIVED
Copyright © 2005 ADTRAN, Inc.
TRACER 6000 Series Integrated System Manual
and numbers should not experience
MAX
and
MIN
and
MIN
. High received power numbers
P H
OWER ISTORY
24
Hours
(8 hours
displayed
at a time)
numbers could be
MAX
numbers may be
MAX
612806420L1-1F