General Menu Operation; Select And Activate A Menu Item; Figure 3-2. Select A Menu Item - ADTRAN TSU 600 User Manual

General Menu Operation

Select and Activate a Menu Item

61200.076L2-1
The TSU 600 uses a multilevel menu structure contain-
ing both menu items and data fields. All menu
operations and data are displayed in the LCD window.
The menu items are numbered and can be viewed by
scrolling with the Up and Down arrows.
• Data Field
A menu item followed by a colon (:) identifies a data
field that can be edited.
• Display Field
A menu field followed by an equal symbol (=)
identifies a field used for value display and is not
available for editing.
• Arrows
Menus that display small up or down arrows in the
lower right corner indicate there are more menu
items than are viewable on a two-line LCD. The
additional menu items are accessed with the up or
down arrows. Undisplayed menu items are also
available by using the appropriate menu number.
Place the cursor on the desired menu item by pressing
the number corresponding to the menu item or
highlighting the menu item with the Up and Down
Arrow. In this example place the cursor on
2)CONFIG. Then press Enter or the number a second
time. See Figure 3-2.
TSU 600 User Manual
Chapter 3. Operation
Figure 3-2
Select a Menu Item
4 3