ADTRAN 6000 Series System Manual page 105

TRACER 6000 Series Integrated System Manual
U I
PGRADE MAGE IS
W SC T
AITING FOR
B
TO EGIN
R SC T
ECEIVING RANSFER
R B S
EADY TO EGIN
T
RANSFER
S SC T
ENDING RANSFER
V F I
ERIFYING LASH
E F
RASING LASH
P F
ROGRAMMING LASH
612806420L1-1F
I Indicates that the system image was not verified as a valid image for
NVALID
the specified update. Before the firmware upgrade begins, the
TRACER 64x0 verifies that the image is valid. If it is not valid for the
system, U
PGRADE
Indicates that the local system is waiting to transfer the firmware
RANSFER
upgrade information to the remote system over the service channel.
Service channel communications over the RF link allow a user
connected to a local system to upgrade the firmware of a remote
system. Before the remote system begins the firmware upgrade
process, a complete copy of the new firmware image must be received
and stored in the remote system. This is done automatically when the
remote system is chosen from the U
Indicates that the system is receiving the firmware upgrade information
from the remote system over the service channel. Service channel
communications over the RF link allow a user connected to a local
system to upgrade the firmware of a remote system. Before the remote
system begins the firmware upgrade process, a complete copy of the
new firmware image must be received and stored in the remote system.
This is done automatically when the remote system is chosen from the
U D
PGRADE
SC Indicates that the local system is ready to transfer the firmware upgrade
ENDING
information to the remote system over the service channel. Service
channel communications over the RF link allow a user connected to a
local system to upgrade the firmware of a remote system. Before the
remote system begins the firmware upgrade process, a complete copy
of the new firmware image must be received and stored in the remote
system. This is done automatically when the remote system is chosen
from the U
PGRADE
Indicates that the local system is sending the firmware upgrade
information to the remote system over the service channel. Service
channel communications over the RF link allow a user connected to a
local system to upgrade the firmware of a remote system. Before the
remote system begins the firmware upgrade process, a complete copy
of the new firmware image must be received and stored in the remote
system. This is done automatically when the remote system is chosen
from the U
PGRADE
Indicates that the system flash image is being verified as a valid image
MAGE
for the specified update. Before the new firmware is loaded into the local
flash, the TRACER 64x0 verifies that the flash image is valid for the new
firmware. If it is not valid for the system, the firmware upgrade fails.
Indicates that the system flash is being erased so the new firmware
image can be loaded into the local flash. Before the new firmware is
loaded into the local flash, the TRACER 64x0 verifies that the flash
image is valid for the new firmware. If it is not valid for the system, the
firmware upgrade fails.
Indicates that the new firmware image is being loaded into the local
flash. Before the new firmware is loaded into the local flash, the
TRACER 64x0 verifies that the flash image is valid for the new firmware.
If it is not valid for the system, the firmware upgrade fails.
Copyright © 2005 ADTRAN, Inc.
I I
MAGE IS NVALID
field.
ESTINATION
D field.
ESTINATION
D field.
ESTINATION
Section 6 DLP-5
displays.
D field.
PGRADE ESTINATION
105