Detaching The Connector; Connecting A Wireless Headset - Snom D7C User Manual

Snom D7C User Manual
If a USB device like a speakerphone or conferencing device is connected to the third module in the
chain, it may also need a power adapter that must be connected to a power outlet.
Fig. 10
3. After the modules have been connected to the phone, their LEDs will light up briefly, then turn off,
indicating that the function keys are now ready for use..
D
etaching the connector
Push the three levers on the respective side inward to detach the connector from the footstand.
C
onnecting a wireless headset
On phones with a single USB port, the USB port on the expansion module can be used to connect a
wireless headset via its USB adapter. If two or three expansion modules are daisy-chained, insert
the USB adapter of the wireless headset into the USB port on the last module in the chain,
If the Snom phone has two USB ports, the USB adapter of the wireless headset can be inserted into
the USB port on the expansion module or into the free USB port on the phone.
Module 3 Module 2
Step 1
Setting up the expansion module
Module 1
Step 3
Step 2
9
Phone