Xml Provisioning Of Settings - Snom D7C User Manual

Snom D7C User Manual
3. Click the Key Assignment tab, if necessary.
4. Scroll down to Expansion Keys and the expansion module you want to configure.
5. Under Context of the key you want to configure, select "Active" or one of the configured identities
from the drop-down list. The default is "Active", i.e., the configured key is available for all
configured identities on the phone.
6. Under Type, select "Extension" from the drop-down list.
7. In the Number text field, enter the phone number whose calls you want to monitor and pick up.
8. Optional: In the Label text field, enter a name or descriptive text. See "SmartLabels" on page 11
for more information.
9. Click Apply and Save.
X
ML provisioning of settings
The XML tags of the function keys are an exception from the general rules for XML mass provisioning
of settings for Snom phones because the tag for each key specifies the exact settings for that
particular key. The format is as follows:
<fkey idx="n" context="active" label="x"
Example:
<fkey idx="33" context="active" short_label_mode="text" short_label="" short_default_
text="!!$(::)!!$(generate_via_conditional_label_short)" label_mode="icon_text" icon_type="" reg_
label_mode="icon_text" label="" lp="on" default_text="!!$(::)!!$(generate_via_conditional_label_full)"
perm="" c="1" cslm="1" clm="1">dest &lt;sip:14147356@192.168.10.60;user=phone&gt</fkey>
For more information on function key types, see
Function+Key+Types. For more information on valid values and defaults, see the individual settings
at https://service.snom.com/display/wiki/Settings.
default_text="$name
https://service.snom.com/display/wiki/
17
Configuring the function keys
$state" perm="">argument</fkey>