Replacing Lithium Batteries - Motorola CompactPCI CPN5365 Installation And Use Manual

Hardware Preparation and Installation
1

Replacing Lithium Batteries

!
Warning
1-22
Follow these safety rules for proper battery operation and to reduce
equipment and personal injury hazards when handling lithium batteries.
Use the battery for its intended application only.
Note Do not recharge, open, puncture or crush, incinerate, expose to
high temperatures or dispose of in your general trash collection.
To replace the lithium battery, observe the following guidelines and follow
the steps below.
Note
When replacing the battery, you must apply power to the board
to prevent data loss.
To prevent serious injury or death from dangerous voltages, use extreme
caution when handling, testing, and adjusting this equipment and its
components.
Lithium batteries incorporate flammable materials such as lithium and
organic solvents. If lithium batteries are short-circuited or exposed to high
temperature or pressure, they may burst open and ignite, possibly resulting
in injury and/or fire. When dealing with lithium batteries, carefully follow
the precautions listed below to prevent accidents.
Do not short circuit
Do not disassemble, deform or apply excessive pressure
Do not heat or incinerate
Do not apply solder directly
Do not use different models, or new and old batteries together
Do not charge
Always check proper polarity
Computer Group Literature Center Web Site