Equipment Required
A CPN5365 system requires this equipment:
Overview of Startup Procedures
The following table shows the things you need to do before you can use
this board. It also tells you where to find the information you need to
perform each step.
For information about
Unpacking the hardware
Mounting memory mezzanine cards
Mounting PCI mezzanine cards (PMC)
Hardware Configuration
Hard drive mounting
Installing the CPN5365 and CPTM-01
TM
Powering-up the system
http://www.motorola.com/computer/literature
CompactPCI system enclosure
System console terminal
Operating system
Disk drives
Transition module (CPTM-01) and connecting cables
Go to
Unpacking Instructions on page 1-1
Mounting Memory Mezzanine Modules on page 1-10
Mounting PCI Mezzanine Cards on page 1-11
Hardware Configuration on page 1-13
Mounting the Slim Line EIDE Hard Drive on page
1-12
Before You Install or Remove a Board on page 1-14
and
Installing the CPTM-01 Transition Module on
page 2-3
Applying Power to the System on page 3-1
Equipment Required
1-3
1