Table of Contents
Advertisement
Powering up the CPV5350
When you are ready to power up the CPV5350:
Replacing the On-board Lithium Battery
Do not service or replace the lithium battery in the field.
!
Contact your Motorola service representative to arrange for
service or battery replacement.
Caution
If you must replace the lithium battery use the following guidelines.
Note
Dangerous voltages, capable of causing death, are present in
!
this equipment. Use extreme caution when handling, testing
Warning
and adjusting.
http://www.motorola.com/computer/literature
Verify that the chassis power supply voltage setting matches the
voltage present in the country of use (if the power supply in your
system is not auto-sensing).
On powering up, the CPV5350 displays the PhoenixBIOS banner
and then runs a memory test.
When replacing the battery, you must apply power to the
board to prevent data loss.
Powering up the CPV5350
2-5
2
Advertisement
Table of Contents
