National Instruments FieldPoint FP-1600 Quick Start Manual page 15

fpoint cd.qxd 11/13/00
10
Configure I/O Modules
A. Right-click on the device name in FieldPoint Explorer and select Edit this
Device from the pop-up menu.
B. Click on the Channel Configuration button to bring up the Channel
Configuration dialog box.
C. Select the type of
channel to show,
then select the
channel(s) that
you want to
change. To select
more than one
channel, uncheck
the One channel
at a time box.
NOTE: Configuration options are module-dependent. The options
listed here might not be available for your particular module. Refer to
your I/O module operating instructions for details on configuration
options.
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1:24 PM Page 14