Table of Contents
Advertisement
•
The TA7104i is accessible for future upgrade, maintenance and troubleshooting, and cables
can be easily connected.
•
The cabling is away from the following:
•
Sources of electrical noise such as radios, transmitters, and broadband amplifiers.
•
Power lines and fluorescent lighting fixtures.
•
Water or moisture that could enter the casing of the TA7104i.
•
The airflow is not restricted around the TA7104i or through the vents of the unit. The unit
requires a minimum of 25 mm (1 in.) clearance.
•
The operating temperature is between 0°C and 40°C.
•
The humidity is not over 85% and is non-condensing.
Wiring Requirements
Make sure that the telephone wiring, LAN and WAN cables reach the device and can be
dressed in a manner that is safe for the wiring, does not pull or create lateral stress on the
connectors on the device, and does not present a trip hazard to personnel working in the vicinity
of the equipment. Do not connect any cable or wiring at this time.
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-05-15
14
TA7014i Hardware Installation
Advertisement
Table of Contents
