Table of Contents
Advertisement
3
Installation
This chapter describes the installation of the TA7104i.
Planning the Installation
3.1
Before installing the TA7104i, you should complete the following tasks:
•
Create a network diagram (see section "Network Diagram").
•
Gather IP-related information (see section "IP-Related Information" for more information).
•
Install the hardware and software needed to configure the TA7104i
(see section"Network Information").
Installation Checklist
The installation checklist lists the tasks for installing the TA7104i. Print a copy of this checklist and
mark the entries as you complete each task. Include the completed checklist in your site log.
Figure 3: Installation Checklist
TA7104i name/serial number
Task
Network information available &
recorded in site log
Environmental specifications
verified
Site power voltages verified
Installation site pre-power check
completed
Required tools available
Additional equipment available
TA7104i received
Quick start guide received
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-05-15
Verified By
10
TA7014i Hardware Installation
Date
Advertisement
Table of Contents
