Olympus OEP-3 Service Manual page 162

5-2-6. Paper Remove Position
The printer goes to the paper remove position after the end of cyan printing.
The head cam is rotated to release the thermal head from the platen. The tray motor cam is rotated to
activate the paper remove flap.
As the platen rotates, the chuck opens gradually to guide paper to the paper remove section through the
paper remove flap.
Finally, the tray motor cam is rotated in reverse direction to the print position and then in forward
direction to the home position. The paper remove arm is activated to drop paper on the paper remove
tray.
5-8
OEP-3 V1 (UC)