Description Of Print Operation - Olympus OEP-3 Service Manual

5-2. Description of Print Operation

A print operation is done by switching among five positions through the head cam and combining three
positions through the tray motor cam.
5-2-1. Position Change During Print Operation
Position
head cam
Home Home
Paper feed FF1
FF1
Chuck
FF1
FF1
Print Print
Fast feed FF2
Print Print
Fast feed FF2
Print Print
Removes paper FF1
FF1
FF2
FF1
Home
5-4
Tray cam Operation
1 Decides whether the ribbon cartridge and paper are set or not.
Home
2 Takes up slack of the ribbon and transmits the ribbon tele-file.
Start of print operation
*
1 Indexes ribbon (yellow).
Paper feed
2 Feeds paper.
Paper feed
3 Chucks paper on platen.
Paper feed
4 Detects jamming.
Paper feed
5 Sets the paper print position.
Print
Print Prints yellow.
Print Indexes ribbon (magenta).
Indexes paper.
Print Prints magenta.
Print Indexes ribbon (cyan).
Indexes paper.
Print Prints cyan.
1 Starts paper removal.
Home
2 Opens platen chuck.
Home
3 Ejects paper to the paper remove unit.
Print
4 Places paper on the paper remove tray.
Home
Home * End of print operation
OEP-3 V1 (UC)