Copying Existing Programs And Mixes To A New Location In The User Bank; Éor To A New Location On A Card Bank - Alesis QS6.1 Reference Manual

Part 4: Basic Operation
C E
OPYING
M T
IXES O
U B
SER ANK
You can readily move copies of existing Programs and Mixes into the User Bank.
This is useful if you want to put them in a certain order for recording or performance,
or to arrange interesting starter materials in preparation for editing.
The procedure is an easy one.
1) Press [STORE]. The display will look something like this:
2) Using the [VALUE] buttons or the [EDIT VALUE] slider Ñ also known as
[CONTROLLER D] Ñ pick a User Bank location between 000 and 127 (00 and 99
in the case of Mixes). You can also directly enter the number you want using the
23 [SELECTION] buttons.
3) Press [STORE] again, and youÕre done.
...O T A N
R O
C B
ARD ANK
If you have an SRAM card, you can move a Program or Mix to any one of the banks on
the card. The procedure is the same as listed above for copying a single Program or
Mix to the User Bank, except that in step 2) you would use the [BANK] buttons to
select a Card bank as your destination instead of the User bank. Everything else
works the same.
For more about working with SRAM cards, see Part 9: EXTRAS.
34
P
XISTING
A N L
EW
L
EW OCATION
ROGRAMS
I
OCATION
O
QS6.1 Reference Manual
A
ND
T
N HE
A
N