Copying Sounds Between Programs; Copying Effects Between Programs - Alesis QSR 64 Reference Manual

C
OPYING
Follow the steps below to copy one of the four Sound layers from one Program to
another Program in the User Bank. When copying Sounds between Programs, the
"new" Sound will replace the same numbered Sound in the destination Program, i.e.,
Sound 3 will replace Sound 3.
➀
Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Sound you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁
Press [STORE].
The [STORE] button will begin to flash.
➂
Press [CURSOR
The upper section of the display will read:
➃
Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy
from the currently select Program, or to select the Program Number in the User
Bank you wish to copy the Sound from (000–127).
➄
Press [CURSOR
the lower section of the display.
➅
Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy
to in the currently select Program, or to select the Program Number in the User
Bank you wish to copy the Sound to (000–127). ).
➆
Press [STORE] to complete the copy function.
C
OPYING
Follow the steps below to copy the Effects Patch from one Program to another
Program in the User Bank.
➀
Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Effects you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁
Press [STORE].
The [STORE] button will begin to flash.
➂
Press [CURSOR
The upper section of the display will read:
➃
Use the [VALUE] knob to select the Effects Patch of the currently selected
Program, or any Program (000 - 127) in the User Bank to copy from.
QSR Reference Manual
S B
OUNDS ETWEEN
] once to advance to Page 2.
COPY S OUND 1
SOUND 2
] once to advance the cursor to the Program number value in
E B
FFECTS ETWEEN
] three times to advance to Page 3.
COPY E FFECT
PROG 000
Overview: Chapter 4
P
ROGRAMS
TO
(STR)
P
ROGRAMS
TO
(STR)
11