HP AdvanceStack 10Base-T Hub-12 Installation And Reference Manual page 37

3. Connect the "local modem" to the serial port on your PC or install it
in the PC if it is an internal modem, and configure that modem by
using the "Local Modem" initialization screen in HP Stack Manager.
4. From the "Communications" screen under the "Settings" menu, click
on the Modem button and enter the phone number of the remote
modem.
5. From the main screen click on the "Connect" button to establish the
communication connection between the two modems. Once the
connection is established, the hub or stack of hubs will be displayed
on the HP Stack Manager's main screen.
See the HP Stack Manager online help for more specific instructions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installing the HP AdvanceStack 10Base-T Hubs
1-23