Part 1: Chassis Preparation - Vex Robotics Pro VersaChassis Mini Assembly Instructions Manual

217-6327-752
VersaChassis Mini 4 Wheel Drive Assembly Instructions

Part 1: Chassis Preparation

Before you can build your VersaChassis Mini you will need to drill holes in the chassis side rail
where your wheels will be located. These holes were not pre-drilled to give teams the ability to
pick exactly where they want their wheels to be located.
When completed with Part 1, you will end up with two 15.5"
Long VersaFrame members with wheel holes and (optional) set
screw access holes. See Step 2 for more information about set
screw access holes.
vexpro.com
Copyright 2018, VEX Robotics Inc.
2018-06-15
6