Loading Files Created On The Akai Mpc60/60Ii - Akai MPC 2000XL Operator's Manual

Chapter 10: Disk Operation

Loading Files Created on the AKAI MPC60/60II

Loading a Sound (.SND) file
Follow steps 1 to 4-1 in "Loading Files" and select the .SND file in step 3.
Loading Sound Set (.SET) Files
Follow steps 1-3 in "Loading Files" and select the .SET file in step 3. Then press DO IT [F6].
......................................................................................................
........................................................................................................
Press SET [F5].
......................................................................................................
........................................................................................................
The sounds assigned to the MPC60/60II can now be converted to Note Numbers on the
MPC2000XL.
Select one of the pads of the MPC60/60II in the MPC60 Pad: field, and then select the Note
Number that you want to assign it to in the Becomes note: field, then press LOAD [F5].
......................................................................................................
........................................................................................................
Then continue from step 4.
Loading a Sound from a Set File
This way, you can load a specific sound from a set file.
Follow steps 1-3 in "Loading Files" and select the .SET file in step 3. Then press DO IT [F6].
......................................................................................................
........................................................................................................
Press SOUND [F3].
Select one of the pads of the MPC60/60II in the MPC60 Pad: field, or select the name of the
sound at the File: field, then press DO IT [F5].
Load a SET
[SET] load a SET file
[SOUND] load one sound from
the SET file
SOUND
Conversion table
MPC60 pad:HIHT CLSD (A01)
.................................................................................
Becomes note:42/A03
Load
Replace same sound in memory
:NO(FASTER)
[CLEAR] erases existing P & S
[ LOAD ] adds to existing P & S
CLEAR
Load a SET Load a SET
[SET] load a SET file load a SET file
[SOUND] load one sound from load one sound from
the SET file the SET file
SOUND CANCEL
....................................................................................
Load a Sound Load a Sound
MPC60 pad: MPC60 pad:HIHT CLSD (A01) HIHT CLSD (A01)
File:CLOSE_HAT
CANCEL
........................................................................................
Page 170
CANCEL SET
CANCEL LOAD
a SET
CANCEL LOAD
SET
DO IT