Akai MPC 2000XL Operator's Manual page 160

Chapter 9: Effects
<X-OVER L&R>
Select X-OVER L&R in the Type: field of Delay/Echo window. This returns the feedback of
the stereo input signals after reversing the left and right channels. This produces an interesting
pan delay effect.
Feedback: This adjusts the feedback volume.
Feedback delay: This adjusts the delay time between 0 and 335ms.
HF damping: This sets the high frequency contained in the sound within the feedback.
L/R delay offset: When this is set to any number other than 0, it produces a panning
delay effect. Set the ratio against time set in Feedback delay: field. When the value is
positive, the effect runs from right to left, when negative, the effect runs from left to right.
<STEREO>
Select STEREO in the Type: field of Delay/Echo window. This produces a delay effect to both
the LEFT and RIGHT inputs.
Feedback: This adjusts the feedback volume. The feedback volume of both left and right can
be set individually.
Feedback Delay: This adjusts the delay time between 0 and 335ms. The delay time of
both left and right can be set individually.
HF damping: This sets the high frequency contained in the sound within the feedback group.
This can be set for left and right individually.
......................................................................................................
DELAY/ECHO
Type:XOVER L&R
Feedback delay:335ms Feedback delay:335ms
L/R delay offset: L/R delay offset:
SOLO BYPASS
...................................................................................................... DELAY/ECHO
Type:STEREO
Feedback: 0% Feedback: 0%
Feedback delay:335ms Feedback delay:335ms
HF damping:20kHz
SOLO BYPASS
Page 148
Feedback: Feedback: 0% 0%
HF damping:20kHz
0% 0%
CLOSE MIXER
Left Right
0%
335ms
20kHZ
CLOSE MIXER