Akai MPC 2000XL Operator's Manual page 132

Chapter 7: Creating and Editing Programs
DCY SW
This switches between the sound assigned to the program and the two sounds set here using the
value set in the Decay field (see following pages). When this option is selected, two If
over: fields appear to the right of the Mode: field. Set the decay value and note here. In the
following example, the sound assigned to the selected note number generates MIDI note number
60 up to decay 44, 36/A02 between decay values 45 to 88, and 53/A16 for velocity over 89.
Pgm:
.......................................................
Pad:A01=Note:37
..................................................................................................
Note:60=Snd:TAM
Mode:DCY SW
ASSIGN
Normally the DECAY is assigned to the NOTE VARIATION slider and is used to switch the sound
by changing the decay parameter with the NOTE VARIATION slider. For example, by using this
as a hi-hat sound, you can switch between closed, half, and open sounds effectively.
1-NewPgm-A
If over: 44, use:36/A02 If over: 44, use:36/A02
DCY SW If over: 88, use:53/A16 If over: 88, use:53/A16
PARAMS DRUM PURGE
Page 120
Pad assign:PROGRAM Pad assign:PROGRAM
AUTO PLAY