Chapter 6: Creating and Editing Sounds
•
<Sound spec.>
This displays the specifications of the currently selected sound. You cannot change the
value here.
Type: Displays stereo or monaural mode.
Rate: Displays the frequency of the sample.
Size: Displays the data size of the sound.
Deleting a Sound
To open the Sound window, select the Snd: field and press OPEN WINDOW.
Press DELETE [F2] to open the Delete Sound window.
Select the sound you want to delete in the Snd: field and press DO IT [F5].
If you press ALL [F3], the following warning will appear. All the sounds can be erased when DO
IT [F5] is pressed.
Copying a Sound
To open the Sound window, select the Snd: field and press OPEN WINDOW.
Press COPY [F5] to open the Copy Sound window.
Select the sound to be copied with the DATA wheel.
Move to the New name: field with the CURSOR DOWN key and enter a name for the copy. Tap
a drum pad or rotate the DATA wheel to display the name window.
Press ENTER [F5] to save the new name.
Press DO IT [F5] to copy the sound.
....................................................................................
Delete Sound
Delete Sound
Snd:loop_1
Pressing DO IT will erase
Pressing DO IT will erase
this sound !!
this sound !!
ALL
CLOSE
........................................................................................
....................................................................................
Delete ALL Sound
Delete ALL Sound
Pressing DO IT will erase
Pressing DO IT will erase
ALL sounds!!
CANCEL
........................................................................................
....................................................................................
Copy Sound
Snd:loop_1
COPY
New Name:loop_2
CANCEL
........................................................................................
Page 94
DO IT
DO IT
DO IT