Setting The Pitch - Akai MPC 2000XL Operator's Manual

Setting the Pitch

This sets the pitch of the sound assigned to each note.
Pgm:
...............................................................................................
<Envelope>
Attack: Attack:
Decay:100
Dcy md:END
ASSIGN
Select the Tune: field with the CURSOR keys and enter the number with the DATA wheel. You
can enter numbers directly with the numeric pad. In this case press ENTER after you have en-
tered the number.
Select the Tune: field and press OPEN WINDOW.
•
Tune:
This is the same as the Tune: field on the previous screen.
•
Prog tempo:
How much the sample's tempo, set in the trim mode, has been changed by the tune set
above will be displayed. The value can not be changed here.
This is convenient when matching the tempo of the phrase sample of a drum loop etc..
•
Velo4 4 4 4 4 Pitch:
This allows the velocity to control the pitch. The larger the value, the higher the pitch
becomes with the velocity impact. When this is set to a negative value, the pitch becomes
lower as the velocity impact increases. When this is set to 0, the pitch does not change
regardless of the velocity impact.
•
Velo:
This displays the velocity value in real-time by hitting the drum pad.
1 Note:60/C05-OFF
0 0
PARAMS DRUM
......................................................................................................
Velo>>Pitch
Note:60/C05-OFF
.....................................................................................................
Tune:-120
Prog tempo Prog tempo :120.0 :120.0
.........................................................................................................
Page 125
Chapter 7: Creating and Editing Programs
<Filter> Tune:-120
..........................
Voice
Freq:100
Overlap:
Reson: 0 Reson: 0
POLY
PURGE AUTO PLAY
Velo Pitch: Velo Pitch: 0 0
Velo:127 Velo:127
CLOSE PLAY