Akai MPC 2000XL Operator's Manual page 161

Reverb
The reverb effect adds an echo to the original sound. There are 3 main types: Hall (room) Gate,
and Reverse.
<HALL, ROOM>
Select from LARGE
Type: field in the Reverb window. These create a feeling of space.
Predelay: This adjusts the delay time from the generation of the sound to the beginning of
the reverb.
Time: This adjusts the time it takes for the reverb to diminish and dissolve.
Diffuse: This sets the density of the reflected sound of the reverb. When the value is low,
the echo effect is emphasized. When it is high you get a smoother effect.
Near: This adjusts the distance from the sound source. The larger the value, the closer the
sound, the smaller the value, the more distant the sound becomes.
LF damping: This cuts the low frequency contained in the reverb.
HF damping: This cuts the high frequency contained in the reverb.
<GATE>
Select GATED 1 or GATED 2 in the Type: field of the Reverb window. This produces an
effect of a reverb sound that is forcedly cut. The decay characteristics differ between GATE 1 and
GATE 2. GATE 2 sounds more synthetic.
Predelay: This adjusts the delay time from the generation of the sound to the start of the
reverb.
Time: This adjusts the time it takes for the reverb to dissolve.
Diffuse: This sets the density of the reflected sound of the reverb. When the value is low,
the echo effect is emphasized. When it is high you get a smoother effect.
HALL, SMALL HALL, LARGE
......................................................................................................
REVERB
Type:LARGE HALL
Predelay:50ms
Time:51
Diffuse:90
SOLO BYPASS
......................................................................................................
REVERB
Type:GATED 1
Predelay:50ms
Time:50
Diffuse:90
SOLO BYPASS
Page 149
ROOM, SMALL
Near:35
LF damping: 10Hz LF damping: 10Hz
HF damping:13kHz
CLOSE MIXER
CLOSE MIXER
Chapter 9: Effects
ROOM in the