Renaming A Song - Akai MPC 2000XL Operator's Manual

Select the next sequence (assigned to Step 2), with the DATA wheel.
Song:01-Song01
.......................................................
TEMPO:MAS
LOOP:OFF
In the same way as above, assign sequences and increase the number of steps.

Renaming a Song

To open the Song window, select the Song: field and press OPEN WINDOW.
Song name:
•
Changes the name of the song.
Tap a drum pad or rotate the DATA wheel to display the name window.
Press ENTER after you have entered the name.
Note: If you do not press the ENTER key and move the Default Name: field or
other pages with the CURSOR DOWN key, the entered name will be ignored and
the name will not change.
Default name:
•
This sets the name that will automatically be used when data is entered into a new song
(titled "Unused"). Enter the name in the same way as for the Song name.
Step
.....................................................................
™:120.0
1 01-Sequence01
2 02-Sequence02
...................................................................................................... SONG
Song name:Song01
.................................................................................................
Default name :song Default name :song
DELETE
.........................................................................................................
Page 79
Now:003.01.00
Sequence
(end of song) (end of song)
CONVRT DELETE INSERT
CLOSE COPY
Chapter 5: Song Mode
Reps
1
1