Removing The Cover From The Booster; Cleaning; How To Act Following An Accident; Product Service Life - Cybex Silver SOLUTION M-FIX User Manual

REMOVING THE COVER FROM THE BOOSTER

Release the four press-studs of the seat cover at the front and the back. Now, pull off
the cover over the armrests and along the seat surface.

CLEANING

Note! Please wash the cover before you use it the first time. The cover may only
be washed at 30°C with a delicate wash program. Washing at more than 30°C may
result in discolouration of the cover fabric. Please wash the cover separately from
other laundry and do not dry in the dryer! Never dry the cover in direct sunlight! The
plastic parts can be cleaned with a mild cleaning agent and warm water.
WARNING! Never use harsh cleaning agents or bleaches!

HOW TO ACT FOLLOWING AN ACCIDENT

WARNING! An accident may cause damage to the child car seat that is not
identifiable with the naked eye. Please replace the seat after an accident. In
case of doubt, please consult your dealer or the manufacturer.

PRODUCT SERVICE LIFE

The CYBEX SOLUTION M-FIX is designed to meet its specifications for the
entire service life of approximately 9 years. However, as there can be very large
temperature fluctuations and unpredictable strains in vehicles, the following points
must be observed:
• If the vehicle is directly exposed to sunlight for a longer time, the child car seat must
be removed from the vehicle or covered with a light cloth.
• Regularly check all plastic and metal parts of the seat for damage, deformation or
change of colour. If you discover any changes, the child car seat must be disposed
or checked and possibly replaced by the manufacturer.
• Changes to fabric, especially bleaching, are perfectly normal when used in a
vehicle and do not impair the seat's function.
25