Gewährleistung / Warranty; Technische Daten / Technical Data - Viessmann Plasser & Theurer 09-3X Operation Manual

Tamping machine
Hide thumbs Also See for Plasser & Theurer 09-3X:
Table of Contents

Advertisement

Nr.
Bezeichnung
1777
2x Spritzling
„Leiter, Räder, Spannwagen"
1778
1x Spritzling „Klimaanlage, Dach"
1782
1x Spritzling
„Spannwagen, seitliche Kopfverdichter"
1784
1x Spritzling „Bodengruppe, Hörner"
7063
1x Lampenkopf hinten
(enthält beide Lampengehäuse), zzgl.
2x Glaslinse, 4047
10. Gewährleistung
Jeder Artikel wurde vor Auslieferung auf volle Funk-
tionalität geprüft. Der Gewährleistungszeitraum be-
trägt 2 Jahre ab Kaufdatum. Tritt in dieser Zeit ein
Fehler auf und Sie finden die Fehlerursache nicht,
nehmen Sie bitte Kontakt mit uns auf (service@
viessmann-modell.com). Senden Sie uns den Artikel
zur Kontrolle bzw. Reparatur bitte erst nach Rück-
sprache zu. Wird nach Überprüfung des Artikels ein
Herstell- oder Materialfehler festgestellt, wird er kos-
tenlos instandgesetzt oder ausgetauscht. Von der
Gewährleistung und Haftung ausgeschlossen sind
Beschädigungen des Artikels sowie Folgeschäden,
die durch unsachgemäße Behandlung, Nichtbeach-
ten der Bedienungsanleitung, nicht bestimmungsge-
mäßen Gebrauch, eigenmächtigen Eingriff, bauliche
Veränderungen, Gewalteinwirkung, Überhitzung u.
ä. verursacht werden.
11. Technische Daten
Betriebsspannung:
0 – 21 V analog / bis 21 V digital
Betriebsstrom:
Digitalsysteme:
RailCom:
Temperatur / rel. Feuchtigkeit (Betrieb):
+8 – +35 °C / max. 85 % nicht betauend.
Temperatur / rel. Feuchtigkeit (Lagerung):
0 – 40 °C / max. 85 % nicht betauend.
Maße:
Gewicht:
22
10. Warranty
Each model has been tested as to its full function-
ality prior to delivery. The warranty period is 2 years
starting on the date of purchase. Should a fault oc-
cur during this period please contact our service
department
Please send the item to the Viessmann service de-
partment for check and repair only after consulta-
tion. If we find a material or production fault to be
the cause of the failure the item will be repaired
free of charge or replaced. Expressively excluded
from any warranty claims and liability are damages
of the item and consequential damages due to in-
appropriate handling, disregarding the instructions
of this manual, inappropriate use of the model, un-
authorized disassembling, construction modifica-
tions and use of force, overheating and similar.
11. Technical data
max. 300 mA
DCC/MM
ja
262 x 34 x 48 mm
309 g
No.
Description
1777
2x injection-molded part
„ladder, wheels, tension carriage"
1778
1x injection-moulded part „air con, roof"
1782
1x injection-moulded part
„tension carriage, side head compressor"
1784
1x part „floor assembly, horns"
7063
1x rear lamp head
(both lamp housings), add. 2x glass
lens, 4047
(service@viessmann-modell.com).
Operating voltage:
0 – 21 V analogue / up to 21 V digital
Operating current:
Digital systems:
RailCom:
Temperature / relative humidity (operation):
+8 – +35 °C / max. 85 % non-condensing.
Temperature / relative humidity (storage):
0 – 40 °C / max. 85 % non-condensing.
Dimensions:
Weight:
max. 300 mA
DCC/MM
yes
262 x 34 x 48 mm
309 g

Advertisement

Table of Contents
loading

This manual is also suitable for:

2691

Table of Contents