Gewährleistung / Warranty; Technische Daten / Technical Data - Viessmann 5108 Operation Manual

H0 level crossing ebüt 80, fully automatic
Table of Contents

Advertisement

9. Gewährleistung
Jeder Artikel wurde vor Auslieferung auf volle Funktionalität
geprüft. Der Gewährleistungszeitraum beträgt 2 Jahre ab
Kaufdatum. Tritt in dieser Zeit ein Fehler auf und Sie finden
die Fehlerursache nicht, nehmen Sie bitte Kontakt mit uns
auf (service@viessmann-modell.com).Senden Sie uns
den Artikel zur Kontrolle bzw. Reparatur bitte erst nach
Rücksprache zu. Wird nach Überprüfung des Artikels ein
Herstell- oder Materialfehler festgestellt, wird er kostenlos
instandgesetzt oder ausgetauscht. Von der Gewährleistung
und Haftung ausgeschlossen sind Beschädigungen des
Artikels sowie Folgeschäden, die durch unsachgemäße
Behandlung, Nichtbeachten der Bedienungsanleitung, nicht
bestimmungsgemäßen Gebrauch, eigenmächtigen Eingriff,
bauliche Veränderungen, Gewalteinwirkung, Überhitzung
u. ä. verursacht werden.
10. Technische Daten
Datenformat:
Betriebsspannung:
Betriebsstrom:
Ruhestrom:
analog (AC, DC),
digital (DCC, MM)
10 – 16 V AC~
14 – 24 V DC=
13 – 24 V Digitalsignal
< 150 mA
< 30 mA
9. Warranty
Each model is tested as to its full functionality prior to de-
livery. The warranty period is 2 years starting on the date
of purchase. Should a fault occur during this period please
contact our service department (service@viessmann-
modell.com). Please send the item to the Viessmann ser-
vice department for check and repair only after consulta-
tion. If we find a material or production fault to be the cause
of the failure the item will be repaired free of charge or
replaced. Expressively excluded from any warranty claims
and liability are damages of the item and consequential
damages due to inappropriate handling, disregarding the
instructions of this manual, inappropriate use of the model,
unauthorized disassembling, construction modifications
and use of force, overheating and similar.
10. Technical data
Data formats:
Operating voltage:
Operating current:
Stand-by current:
analogue (AC, DC),
digital (DCC, MM)
10 – 16 V AC~
14 – 24 V DC=
13 – 24 V digital signal
< 150 mA
< 30 mA
15

Advertisement

Table of Contents
loading

Table of Contents