VTech CTM-A2415 Master User Manual page 10

Replace telephone base battery
installation
The telephone base battery is pre-installed. To
replace the telephone base battery, follow as
shown below.
1. Remove the screw with cross head
screwdriver. Gently
compartment cover.
2. Remove the used battery from the
comparment. Plug the new battery connector
securely into the socket inside the base battery
compartment. Place the battery with the label
THIS SIDE UP facing up and the wires inside
the battery compartment.
3. To replace the handset cover, align all the
tabs on the base compartment battery cover
against the corresponding grooves, then
install the screw.
open the battery
EN - 10
Replace a handset battery installation
The handset battery is pre-installed. To replace
the handset battery, follow as shown below.
1. Use a narrow object to pry open the screw
cover and remove the screw with cross head
screwdriver. Then, insert a 5 mm standard flat
head screwdriver in the provided slot and
gently open the handset cover.
2. Unplug the battery connector from the
socket and then remove the battery from the
handset battery compartment.
3. Plug the battery connector securely into the
socket inside the handset battery compartment.
Place the battery with the label THIS SIDE
UP facing up and the wires inside the battery
compartment.