ADInstruments AD2821A Operation Manual page 60

AD2821A OPERATION MANUAL
5. Sorting Setup
Ü
Key Convention：
Key Main Menu

Select the former item

Select the next item
Select parameter for

StD setup
Select parameter for

StD setup

Enter the sub menu
Return to

measurement state
Table 4-4 Key convention in sorting setup
l Press  key to select the second function, "SHIFT"
will be lighted on the screen.
l Press LIMIT to enter the sorting setup, P1~ will be
flashing on the screen, and the value of P1~ is also
displayed.
Use ,  to select the following sorting parameters:
l
P1_: Low limit of P1
P1~: High limit of P1
P2_: Low limit of P2
P2~: High limit of P2
P3_: Low limit of P3
P3~: High limit of P3
Q_: Low limit of Q
D~: High limit of D
StD: Standard value

Press key to abort the sorting setup and return to
l
Data Input
Select the left digit
Select the right digit
Increase the digit, move
the point left and set the
unit
Decrease the digit, move
the point right and set the
unit
Confirm the data input, and
return to the main menu
the
Return to the main menu
60