Setting Up A Job; In-Line Mode - Ricoh Plockmatic SquareBack Trimmer Operator's Manual

CIP Training Plockmatic SquareBack Trimmer

Setting Up a Job

In-line mode

Setting up the Fiery controller
A
X
B
C
Setting up the Fiery
This procedure describes how
to set up the Fiery when running
the SquareBack Trimmer. The SBT
receives information about the
finishing of the booklets from the
Fiery job properties.
1. Within the Job Properties select the
Finishing Options [A]
2. To activate the SquareBack function
on the Plockmatic SBT select the
'Book Fold' option [B].
3. To activate the Trimming function
select 'Trim' [C].
4. Disregard the 'Trimming Position'
This setting does not apply to the
SBT.
NOTE:
The amount of the SquareBack and
the amount of trim is set on the
SBT LCD panel.