Ricoh Plockmatic SquareBack Trimmer Operator's Manual page 39

CIP Training Plockmatic SquareBack Trimmer
Operational Best Practices
•
Make sure to have the correct settings for thin or thick booklet: thin booklet is thinner than
1.3 mm (0.051") and equals approximately to 6 sheets 80 g/m (see section 3 of this manual:
"Booklet size" for more information about this);
•
Recommended book fold interval, minimum number of sheets:
•
64 GSM M
•
80 GSM
M
•
90 GSM
•
120-140 GSM = 4 sheets,
•
200-220 GSM = 3 sheets,
•
280-350 GSM = 2 sheets.
•
If average book fold result is not satisfying, please see section 5 of this manual: "Square
Back Fine Adjustment";
•
Minimum trim for each cut is 1 mm, but to avoid trim waste on the stacked booklets
recommended minimum trim would be 2 mm;
•
Be cautious when using side trim. Please notice the position of the staples and set head
and foot trims so that the staples are not cut;
•
When using lower GSM <80 GSM use a thicker cover to get an improved fold result.
= 9 heets,
= 6 heets,
= 5 sheets,