Ricoh Plockmatic SquareBack Trimmer Operator's Manual page 21

CIP Training Plockmatic SquareBack Trimmer
Face Trim
Face Trim
Push the green check mark to confirm the changes or the red cross to discard them and to go
back to the main menu. Pushing the blue play button will bring the user to the next setting:
"Side Trim".
Side Trim
Face Trim
This function trims the front edge of
the booklet to get an even length on
every page.
When Auto mode is on, a minimum
trim is performed on the booklet. If the
amount of trim is not satisfactory, the
user can adjust it manually by tapping
on the green switch, which will turn the
Auto mode off.
To adjust the amount of face trim, press
[+] or [-] or enter the desired length of
the booklet using the numeric keypad.
NOTE:
If the values chosen are out of the paper
bounds, the lengths will automatically
be adjusted to the limit values.
Side Trim
This function trims the sides of the
booklet.
Side trim is set off by default and can
be turned on by toggling the switch.
NOTE:
Use side trim with caution. Please note
the position of the staples, set head
and foot trims so that the staples are
not cut.