Placing Specimen - MTS Systems Exceed 22 Series Product Information

Placing Specimen

MTS Exceed™ 22 Series Product Information
During the test, use the specimen clamp to put the Charpy notched specimen onto
the jaw bearing. The specimen clamp has the specimen notch alignment function.
★ Note: Both sides of the specimen should press closely against the jaw and
bearing, and location of specimen should not change when the clamp is loosened.
It is prohibited placing specimen with hands during the test.
Specimen clamp
Jaw
Placement of Charpy notched specimen

Placing Specimen

Specimen
Specimen
support plate
Operation 41