Power Switch (I/O); Content Power Switch (I/O) - MTS Systems Exceed 22 Series Product Information

Power Switch (I/O)

Power Switch (I/O)
Emergency stop
MTS Exceed™ 22 Series Product Information
Power switch of the main unit is located on the left of the electric control box in
the rear of the equipment. Turn the power switch to "I" to supply power to the
main unit and controller. When the power switch is turned on, LCD of the
controller panel is lighted. Turn the power switch to "O" to turn the power off.
The tester is also equipped with emergency stop button that can cut off power of
the motor. This button can only be used for emergency purposes.
The emergency stop button should be checked regularly when the controller has
power but system is not running tests. The controller continuously monitors
electrical connections associated with the emergency stop button, and will alert
the user once it detects any errors. Press the emergency stop button to check
relevant conditions.
Press the emergency stop button, cut off power of the motor, and stop the test
program. Then, rotate the emergency stop button clockwise to release
emergency stop. In the case of emergencies, use this button to stop your tester.
Power Switch (I/O)
Operation 37