Installing Shields - MTS Systems Exceed 22 Series Product Information

Installing Shields

Installing Shields
28 Installation
Shields are used to prevent specimen from splashing, so as to protect the safety of
those entering the danger zones. Each Exceed 22 series tester is equipped with
the shields. The shields consist of main shield, left shield, right shield, and
several deflector boards. They can form an entirely enclosed test area.
The main shield, left shield, right shield, and electric control box are dismantled
from the main frame during shipment and packaged independently. After the
installation of the main unit is ready, you need to install the shields and electric
control box.
MTS Exceed™ 22 Series Product Information