Pilz PSS Series Operating Manual page 25

PSS SB DI8O8
Changes from version IV to version V
Old
p. no.
14 ff.
18
Changes from version V to version VI
Old
p. no.
7
Changes from version VI to version VII
Old
p. no.
---
---
---
20
Changes from version VII to version VIII
Old
p. no.
4
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
New Change
p. no.
14 ff. Procedure when configuring test pulses and outputs
using system software PSS SW PG, from version 4.1.
20 Condensation is not permitted.
New Change
p. no.
7 Internal wiring diagram was amended.
New Change
p. no.
4 New: section "Detecting signals at the inputs"
All subsequent sections moved forward
5 New: information on device's reaction when using
capacitive loads > 1µF
6 New: section under "WARNING" with timing diagram
20 New: version information under "Transmission rate"
New Change
p. no.
4 Pulse length for guaranteed signal detection >
Event Timeout
Operating Manual