Changes In The Documentation - Pilz PSS Series Operating Manual

Changes in the documentation

Changes from version I to version II
Old
p. no.
2
6
10
15
18
Changes from version II to version III
Old
p. no.
3
14
Changes from version III to version IV
Old
p. no.
3
4, 5, 12 4, 5, 12 If an error occurs, outputs are switched off first and then
6
11
17
18
18
Operating Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
New Change
p. no.
2 Description of the positive-switching outputs
6 Description of the tests to be carried out by the user
on outputs that are excluded from the output test
10 Function of the LED "SB active"
15 How groups are displayed in the programming device
18 Information added on the on time during self test
New Change
p. no.
3 The layout of the switch for setting the device address
was amended.
14 Procedure when adding a module to the bus structure
was amended.
New Change
p. no.
3 Labelling strip for inputs and outputs
the error telegram is sent.
6 Category 2 in accordance with EN 954-1 can be
achieved using outputs excluded from the output test.
11 Installation using fixing bolts
17 Information on "Supply" amended
18 Information on test pulses amended
18 Length of off time during self test reduced (< 200 µs)
21