Command Support Data - Sony LIB-D81 Product Description Manual

8.2.3. Command support data

The Command support data can be requested by setting the CMDDT bit to 1.
The SCSI Operation Code of the requested CDB is specified at this point.
If the requested SCSI Operation Code is supported by the autoloader, the data
is returned in the format shown in Table 8.2.3.1. However, if the requested SCSI
Operation Code is not supported, the Support field is set to 1.
Bit 7 6
Byte
0 Peripheral qualifier
1 Reserved(0)
2 ISO version
3
4
5
6
m
Table 8.2.3.1 : Command supported data format
The Peripheral qualifier field and Peripheral device type field contains the
values shown in Tables 8.2.1.2 and 8.2.1.3. Table 8.2.3.2 defines the values in
the Support field.
Support Description
000b Reserved.
001b The autoloader does not support the tested SCSI operation code.
All data after byte 1 is undefined.
010b Reserved
011b The autoloader supports the tested SCSI operation code in
conformance with an SCSI standard. The data format conforms to
the definition in Table 8.2.3.1.
100b Reserved.
101b The autoloader supports the tested SCSI operation code in Sony-
specific manner. The data format conforms to the definition in Table
8.2.3.1.
110b Reserved.
111b Reserved.
Table 8.2.3.2 : Support values and meanings
The ISO, ECMA, and ANSI-approved versions have the same numerical values
as those shown in Table 8.2.1.1.
The CDB usage data field contains information relating to the requested
Operation Code CDB. The first byte of the CDB usage data contains the
requested Operation Code. The remaining bytes of the field (containing the
requested Operation Code CDB) are a one-to-one match to the bits of the Usage
map. All the bits of each field of the Operation Code CDB data field requested
by the autoloader is verified for support, and then, depending on the result, the
corresponding bit in the Usage map is set to 1 (supported) or 0 (not supported).
5 4 3 2
Peripheral device type
ECMA version ANSI-approved version
Reserved(0)
Reserved(0)
CDB Size(m-5)
CDB usage data
Chapter 8 SCSI Commands
1 0
Support
67