Installing The Ait Autoloader - Sony LIB-D81 Product Description Manual

3.5. Installing the AIT Autoloader

The autoloader weighs about 7 kg (15.4 lb.) and has the following dimensions.
Before installing the autoloader, make sure that the surface is appropriate.
N
Note
Install the AIT autoloader on a horizontal surface near an AC power outlet. Also
leave a gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to
circulate.
170 mm
(6.7 in.)
Caution
Make sure that you position the AIT autoloader as indicated in the illustration.
Correct operation is not guaranteed if you place the AIT autoloader on its side.
Front 170 mm (6.7 in.)
350 mm (13.8 in.)
220 mm (8.7 in.)
350 mm (13.8 in.)
50 mm (2.0 in.)
Rear
150 mm
(5.9 in.)
50 mm (2.0 in.)
224 mm (8.8 in.)
(including
rubber feet)
24
Chapter 3 Installation